
Tel:86-755-33194327
86-755-33194351
The Kits Contains
●1*Battery Main Body ●1*Colourful CE5 Rebuildable Clearomizer
●2*Replacement CE5 Coil Head ● 1*ICR14430(650Mah) battery
●1*Luxury Carry Case ● 1*Wall Charger ● 1* User Manual
We reserve the right to change the components and functions of the e-cigarette, in order to improve the e-cigarettes products, without any notice to customers.
Technical Parameters
1.SIZE
|
Length of the Matrix |
150mm(650mah) |
158mm(750mah) |
174mm(1000mah) |
|
Length of the atomizer |
74.5mm |
Capacity of clearomizer |
1.6ml |
|
Length of battery |
81mm(650mah) |
89mm(750mah) |
104mm(1000mah) |
|
Capacity of the battery |
14430: 650mah |
14500: 750mah |
14650: 1000mah |
|
Weight of clearomizer |
14.8g |
weight of battery main body |
35.25g |
|
Weight of 650mah battery |
17.25g |
Weight of 750mah battery |
19.6g |
|
Weight of 1000mah battery |
24.9g |
|
|
|
Weight of whole set |
264.8g |
Size of gift box(case) |
105*83*168 mm |
2.Lithium Battery
|
Model |
ICR14430 |
ICR14500 |
ICR14650 |
|
Rated Voltage |
3.7V |
3.7V |
3.7V |
|
Electric current |
650mah |
750mah |
1000mah |
|
350mA |
350mA |
350mA |
|
|
Charge Time |
2hours |
3hours |
4hours |
|
Puffs |
≤600pcs |
≤700pcs |
≤900pcs |
3.Charging
|
Input Voltage |
AC 220V (50HZ) |
Output Voltage |
DC 4.2 |
|
AC 110V (60HZ) |
|||
|
Input Voltage |
AC <100 mA |
Output Voltage |
DC 350mA |
|
Temperature |
≤45℃ |
Power consumption |
<5w |
Experience the Matrix Telescope System:
● Telescope Multi Batteries
GS-Telescope Matrix builds on the achievement of the Multi Batteries structure. Works with international standard ICR14 series of batteries. ICR14430, ICR14500 and ICR14650 are optional. It’s huge multi batteries function enable over 2500 puffs a day. The Matrix Telescope is the first e-cigarette to apply this kind of multi batteries system. This revolutionary new e-cigarette makes batteries replaceable, rebuildable and repairable.
.
.
●Smart LED Variable Voltage
Blue Light stands for 4.0V Red Light stands for 3.4V Purple Light stands for 3.7V
The Matrix Telescope consists of colorful clearomizer and telescope multi batteries main body. The voltage is variable and controlled by user. Just press the button frequently for five times to adjust the voltage.
●Battery protection system
Matrix Telescope apply the latest high-tech battery protection circuit chip. It won’t get induction when the battery reverse and short circuit. Microchip inside the battery to prevent overcharging There’s a warning LED light of 10 times when the battery is low. It could protect the battery&clearomizer and extent the their working life.
Charging
The Matrix Telescope uses replaceable&rechargeable 3.7V Lithium batteries to avoid damage to your Matrix. It takes 4-5 hours to charge the battery.
To charge the batteries, please put the battery into the charger or gently screw battery into USB charger. The battery should flash to show it is charing. The light would be RED when charging and GREEN when fully charged.
●Only use the dedicated Wall/Usb charger provided to avoid damaging.
●Use high voltage port to charge battery properly.
●Charge the battery fully before using to maintain a good battery life.
●Do not store the battery under hot or humid condition.
How to assemble your Matrix Telescope
To assemble the Matrix Telescope, we need an telescope battery main body, battery, clearomizer and eliquid. Firstly, put the battery(650/750/1000mah) into the battery main body. Secondly, screw the battery main body into the hole on the clearomizer. Gently push the cartridge into the clearomizer.
Using the Matirx Telescope
●The Matrix Telescope works when the LED button pressed. Press the LED button and inhale the clearomizer though the mouthpiece at the same time. Release the button after inhaling. The LED light will be turned on when you pressing the button. DO NOT press the button for over 5 seconds, otherwise it may cause overheating and damage the clearomizer.
●To prevent excess liquids from building up in the monthpiece, clean the overflow prevention cap and vapor pathway frequently. Clean excess liquid liquid around the refill hole before using. Wash with water immediately once you get excess liquid on your lips.
●Remove the cap of the clearomizer, refill liquid into the clearomizer and put it back.
Fault Handler
|
Problems |
Handle way |
|
LED Light does not works after battery connected |
Check the positive and negative position of the battery, make sure it is assessed in the right way. |
|
Clearomizer does not works after battery connected, while LED button works. |
Make sure the clearomizer connected perfect with the battery; Make sure the clearomizer is filled with eliquid; Check the coil head and make sure it works. |
|
None or scant vapor |
Check the battery and make sure it’s not working under low battery level; Press the button frequently for five times to adjust the voltage to High level. |
|
Feel burnt when smoking
|
Refill the clearomizer if the eliquid is nearly run out; Change a coil head of the clearomizer |
|
|
|
After-sale service
Remind: broke、flooding water High voltage charging lead to products damage. Not in warranty.





























